The Wavlink Wavlink AERIAL X WL-WN579X3 Extender setup is a wireless range extender that is designed to boost the Wi-Fi signal strength and range in your home or office. The setup process involves connecting the extender to your existing Wi-Fi network and configuring the device to extend the range of your network
Follow the given steps for Wavlink AERIAL X WL-WN579X3 Extender setup
- Connect the extender to a power source for AERIAL X WL-WN579X3 Extender setup and wait for the power LED to turn on.
- Connect your computer or mobile device to the extender’s Wi-Fi network. The default network name and password are located on the extender’s bottom
- Open a web browser and navigate to the extender’s setup page by entering the default IP address usually 192.168.10.1 in the address bar.
- Follow the on-screen instructions to configure the extender’s network settings. You may need to select your existing Wi-Fi network and enter your network password.
- Once the setup is complete, the extender will restart and you can connect your devices to the new extended Wi-Fi network.
Now your Wavlink AERIAL X WL-WN579X3 Extender setup is successfully done. It’s important to note that the exact steps and setup process may vary depending on your specific device and network setup. It’s always a good idea to consult the device manual or contact the manufacturer’s support team for detailed instructions.
If you need assistance with the Wavlink AERIAL X WL-WN579X3 Extender setup or have any questions, call us at our toll-free number.
How to Reset ARIEL X WL-WN579X3 Extender
This refers to the act of restarting or rebooting an electronic device, such as a computer, smartphone, or router, in order to restore it to its default state or resolve issues that may have caused it to malfunction. This can be done by turning the device off and on again, or by using a specific reset button or option.
Resetting the extender will erase all of your previous settings, including the network name and password, so you will need to set them up again after the reset.
To reset the ARIEL X WL-WN579X3 extender, please follow the steps below:
- Locate the reset button on the back of the extender. It should be a small button labeled “Reset.”
- With the extender powered on, use a paper clip or a pointed object to press and hold the reset button for 10-15 seconds.
- Release the reset button once the LED lights on the extender start flashing.
- Wait for the extender to reboot, which could take some time.
- Once the extender has finished resetting, you will need to set it up again using the default settings.
If you need assistance with the Wavlink AERIAL X WL-WN579X3 Extender setupor have any questions, call us at our toll-free number.
Firmware update
A firmware update is a software update that is specifically designed to update the firmware of a hardware device. Firmware is a type of software that is embedded in a hardware device and is responsible for controlling the device’s functions.
Firmware updates can provide new features or enhancements to existing features, fix bugs or security vulnerabilities, or improve the overall performance and stability of a device.
- Connect your computer or mobile device to the Wi-Fi network of the extender.
- Open a web browser and type the extender’s IP address into the address bar.
- The default IP address forWavlink AERIAL X WL-WN579X3 Extender Setup is usually 192.168.0.1. If this doesn’t work, consult the user manual or contact the manufacturer.
- Enter the username and password to access the extender’s settings page.Typically, the default username and password are “admin” and “password.”
- In the settings menu, look for the “Firmware Upgrade” option.
- This may be located under the “System Tools” or “Maintenance” section.
- Click on “Choose File” or “Browse” button to locate the firmware file you downloaded from the manufacturer’s website.
- Once you have selected the firmware file, click on the “Upgrade” button to start the upgrade process.
- Wait for the upgrade process to complete. Do not turn off the power or unplug the device during the upgrade process as this can damage the device.
- Once the upgrade process is complete, the extender will restart. After the restart, check the firmware version in the settings page to confirm that the firmware has been updated successfully.
If you need assistance with the Wavlink AERIAL X WL-WN579X3 Extender setup or have any questions, call us at our toll-free number.