People prefer getting a Victony WiFi extender setup done at their homes to eliminate WiFi dead zones and get high-speed internet access in all parts of the home. To complete the setup using the web browser, you need to use the login page. After completing the setup process also, you need to do the login to access the extender’s settings. But what if you can not access the login page? If this is the same scenario with you, then this article has come to help you out. In this guide, we have mentioned some best possible solutions to get rid of the Victony wireless range extender login issues.
Victony Extender Login Issue [Causes]
1. Using the wrong web address
2. Putting to use an outdated web browser
3. Using a PC with an older version of the operating system installed
4. Faulty power supply to the extender
5. Unstable internet connection
6. The browser is filled with junk files
7. Technical glitches
Let us now tell you about the troubleshooting process to fix the login issues with your Victony extender.
Victony Extender Login Issue [Fixes]
Step 1: Check the Internet Connection
First of all, we want you to check the internet connection at your home. There is a possibility that due to an unstable internet connection, you can not log in to the Victony extender. So, check with your ISP to confirm the same. Additionally, check the connection between the extender and the router. If it is wired then verify the cable for any damages. Replacing the cable may help. Ensure to make a solid connection between the devices.
If the connection is wireless then bringing the devices closer to each other will be helpful.
Step 2: Fix the Power Supply
After this, you need to check the power supply to the Victony extender. You can do so by checking the power socket into which it is plugged. It should be free of damage. Connect the extender to some other socket if it is broken. Also, check that the cable should not be loosely connected.
Step 3: Reboot the Extender
The next step will help you fix the technical glitches that may be stopping you from accessing the Victony WiFi extender login page. You now need to reboot your extender by powering it off and removing it from the power socket. After waiting for some time, you can plug the extender back and turn it on.
Step 4: Check the Web Address
The next step is to check the web address that you are using to log in to Victony wireless extender. Make sure you are using the correct web address and inserting it in the URL bar of the browser without making any typing errors. Apart from that, it is recommended that the URL should be entered in the URL bar only and not in the search bar.
For your information, you can also use the default IP address of the Victony wireless extender to log in.
Step 5: Fix the Browser
It is now time you fix your browser. You need to update it to the most recent version of the software. Additionally, clean its cache, cookies, and browsing history. For all of this, you need to access the settings of the browser.
Visit Dailyblogit for more informational content.
The Closing Note
After you are done following all the hacks that have been given in this guide, you can go ahead and try to access the Victony WiFi extender login page. We are sure you will not face any issues this time. After you are logged in and reach the admin dashboard, you can make the changes to the settings the way you desire. We recommend you update the firmware on your Victony extender to the latest version and enhance its performance.