Let’s bandy some of the Brother Disney PE550D embroidery problems and its result.
Brother Disney PE550D Embroidery Machine Problems And results
1. Why Is My Needle Threader Not Working?
It’s because you must have placed the presser bottom down, the pressure discs present in the machine would avoid the thread from reaching the needle.
Or another cause can be incorrect needle placement or the wrong size needle is being used. Make sure to use the right needle size and install the needle rightly to help needle threading issues.
2. Why Is My Machine Not Starting?
There might be several reasons why your machine isn’t starting. Either your machine isn’t threaded correctly, or upper pressure is veritably tight. There could also be a possibility that the needle isn’t fitted correctly according to the fabric type for Embroidery digitizing .
Follow these way mentioned down below if your machine doesn’t start or serve
Possible cause – First needle movement would not do unless after the screen is touched.
1. Is the draw of the power cord placed into an electric outlet?
still, go to step 2, If yes.
still, plug the cord in and try to turn it on again, If not.
2. Is your main power switch turned on?
still, go to step 3
If yes.
still, turn on your power switch, If not.
3. Touch your TV screen to take it out of screen saving mode
Did this resolve the issue?
still, continue with your design
If yes.
still, you would have to get in touch with family client service
If not.
4. Check the following
insure the bobbin winder has been moved back to the left- hand side
insure that you have lowered the presser bottom switch.
insure you have attached the embroidery unit. However, insure that you turn off your machine when you’re finishing this procedure or damage might be to your machine, If you want to attach the unit.
4. Can You Combine Multiple Designs At One Time?
You can only keep a analogous spot, but it would affect in damage and a bad design.
5. How To Acclimate The Speed?
Slide the sewing speed regulator to the right or left to elect the asked sewing speed. Sliding the sewing speed regulator to the left wing will suture at the slow speed, and sliding the sewing speed regulator to the right will suture at a faster speed!
6. How To Decide To Use The Right Thread, And Needle Combination?
A thread could be used with this machine
30 – 90 weight. Do n’t use vestments of twenty weights or lower than that. It might beget the machine to malfunction. The lower the number, the heavier the thread. As the figures increase, the thread gets finer. The machine’s needle and embroidery thread that must be used calculate on the kind and consistence of the material.
Needles that could be used with this machine
Home sewing machine – size65/9 –100/16
For embroidery, do n’t use a needle size bigger than90/14
The bigger the number, the bigger the needle, as the number lessens the needles get finer.
Easy way For Brother Disney Pe550D conservation
Brother Disney PE550D conservation is veritably easy. The most pivotal conservation that has to be completed is slicking the rotary hook. Before slicking or drawing, we suggest turning off your machine. To maintain and clean the rotary hook, begin by removing the bobbin case from the rotary hook.
Clean any thread fur in the area using a fur encounter or dusting spray.
also add three or four drops of machine oil painting to the rotary hook.
Now you can fit the bobbin case back into the rotary hook and close the bobbin casing unit.
To make sure the machine runs efficiently, repeat this process twice a day if you’re planning to run a machine eight hours a day.
Once or twice a week, remove the needle plate and clean around the trimmer shanks
with a soft encounter.
Once a week, pass a business card or paper through the bobbin case slit to clean any fur buildup.
Every week, place a drop-off oil painting directly on the needle bar through the places in the needle case, alternate each week.
One week slick the upper needle bar section and the coming week the lower needle bar section.
Once a week oil painting the opening on the needle plate. For this section, we suggest turning on the embroidery machine and setting it to needle one to see the opening on the right side of the machine head.
Add three drops of oil painting each week to that section.
also, add three drops of oil painting to the essence rail of the machine head.
Now you can move your machine head to needle 15 and place 2 drops of oil painting on the other side of the rail.
Once each three to five months, apply white lithium grease to the black essence bar in the machine head. Also, apply this grease to the bus placed on the reverse of your machine head.
Once each three to five months, apply white lithium grease to the color change cam.
You would first need to remove the essence plate placed above the color change cam by loosening the attached screw. also apply grease to the color change cam area.
Place the cover back over the color change cam and strain the screw before pacing.
Always flash back , not to over oil painting. After slicking, sew on a test belt before returning to product to assure redundant oil painting doesn’t stain garments.
Winding Up With Offer
These were the simple way for Brother Disney PE550D conservation and Family Disney PE550D common crimes & results. Now that you veritably well know how to maintain your machine, it’s time to start stretching. Good luck!
Hope it’ll be helpful for you guys!
If there’s any question related to this composition you can simply ask in the comment section and do n’t forget to like and partake with those you suppose might be helpful for them .
Also, if you want digitizing services for your embroidery machine withsuper-fast reversal and excellent quality just click the link below and get a free quotation in lower than 5 twinkles. We offer 50 out on all our Embroidery digitizing services to our implicit guests on their first order.