The materials used to make composite decking combine wood fibers, plastic, and adhesives. The resulting boards need relatively little maintenance and last longer than conventional timber decks. Composite decking has a long lifespan and resists rot and moisture. The boards don’t need sealing, staining, or painting; they won’t fade, warp, or break even when exposed to direct sunshine. Additionally, the boards only absorb little water, making them slip-resistant.
They are becoming a more and more popular substitute for wood decking. If you have robust timber as a foundation and have carefully planned your idea, installing composite decking is not too difficult. Using fasteners makes the deck planks fit into the frame. Before installation, you must allow your boards to acclimatize on the spot for at least 72 hours. Lay the boards on a ground sheet and keep them covered when they arrive. Allow our company to lay decks in your backyard. We provide composite decking Melbourne facilities. With us on board, you will not have any decking dilemmas.
Where should I install my composite decking?
The amount of sun the place will receive, how flat the ground is, and how much privacy you will have are all important when designing your deck. Start by drawing a scaled plan of your deck on paper, being as precise as you can with measurements and expansion gaps. Plan your decking layout carefully, and attempt to minimize cutting and waste. To prevent having to cut a board lengthwise to cover a gap, try to design your deck so that it only fits full boards. Ensure your decking is 150mm below the damp-proof course, and you don’t cover any air bricks if you plan to build it adjacent to a house.
Additionally, you must ensure that the slope must go away from the property and that the fall of the decking is 1:100.This manual explains how to construct a single-level composite deck using a wooden frame and horizontal deck board placement. You have a lot of flexibility with composite decking layouts, but remember that they can need slightly different approaches and joist placements. If you do not wish to make mistakes while planning, call us. We are the best composite decking suppliers in Australia. Trust our decking supplies and planning for your property.
What you’ll need for cleaning composite decks is:
- A container of five gallons for your cleaning solution
- If necessary, a spray bottle for spot-treating tough spots
- A cup for measuring out the cleaner
- Using a leaf blower or brush to sweep up loose debris
- To dry off standing water, use terry cloth towels, sponges, or a sponge mop.
- If you have composite decking, A stiff natural fiber brush or a deck brush with medium stiffness nylon bristles.
A cleaning product specifically for your deck material is the finest way to clean a composite deck. We are decking suppliers in Melbourne that create quality decks. Let our professionals build a deck for you.
Conclusion
You must take several safety precautions, the same with all decking. It does take a lot of moving, lifting, and cutting heavy timber to build a deck. It’s always easier and safer if you can get someone to help you because of the size and weight of the timbers and the frame. Always use structurally treated decking slats and screws made expressly for the job, and apply two preservative coatings to all cut surfaces. This will ensure a durable, long-lasting deck. Use a set square or your saw’s 90-degree guide marker to create precise cuts when you’re sawing, and sand the cut ends to remove splinters. Mark all pilot holes before drilling to ensure your fixings are as accurate as possible. When sawing, cutting, or applying preservatives or other treatments to the deck, be careful to wear the proper protective gear, like gloves, a face mask, or safety goggles. We are Australia’s most trustworthy composite decking suppliers in Melbourne. Trust our decking services for having a new space for your home.