The setting up procedure of the Linksys RE6700 WiFi range extender is not so complex. In order to configure this Linksys WiFi range extender unit you will not need any setup CD or any specific device. In this post, you will get the entire essential information about the login and configuration process of the Linksys RE6700 WiFi range extender.
Linksys RE6700 Extender Pros
- Increase the range of existing WiFi router signals in all directions off the office and house.
- Linksys RE6700 WiFi range extender is compatible with all types of units.
- The login and installation process of this Linksys extender device is so simple and straightforward.
- Place this device at any location of your house or office.
- Compatible with any type of existing router.
Log Into Linksys RE6700 WiFi Range Extender
First, in the power socket place the Linksys RE6700 unit extender power plug. After that, take the computer and link it to the extender network. Later, open the web browser and type http//extender.linksys.com in the address bar. Next, fill in all the details in the relevant field. In the end, click on the login icon to finish the Linksys extender login process.
Note: If you don’t know the extender login details then verify or check the manual booklet which comes with the Linksys extender unit.
Carry Out Linksys RE6700 Extender Configuration Procedure
There are three ways to do the configuration process of the Linksys RE6700 extender.
By Pressing The RE6700 Extender WPS Button
Note: When you are doing this Linksys RE6700 setup process by this method then make sure that your house main router must have or support the WPS button.
- Initially, place the Linksys extender near the router.
- After that, press the WPS button on both the extender and router unit.
- Now, the WPS LED starts flashing solid.
- Thus, the extender and router successfully linked with each other.
- In the end, settle the Linksys RE6700 extender unit in that location where you want to enjoy the fast internet speed.
Link Gadget By Extenders Pin
- Initially, on your Wi-Fi-containing unit, open the web browser to access the Linksys web management page.
- Next, pick the WiFi extender option from the settings.
- Later, in an appropriate area enter the Linksys extender 8-digit pin.
- In the end, tap on OK to complete the Linksys extender setup process.
By Linksys Default Web Portal Do Setup
- Initially, plug in the Linksys extender device power plug-in socket.
- After that, wait to see if the power LED starts flashing.
- Now, connect the WiFi gadget to the Linksys extender network.
- Next, open Chrome and type the Linksys default web address.
- Later, consider all the display instructions.
Hence, doing the above steps the Linksys RE6700 setup process is successfully done now. In case you are facing an issue after doing the login and setup procedure of the RE6700 Linksys extender then try the below solution tips to resolve or fix issues.
Settle RE6700 Extender Near Router
Due to placing the Linksys RE6700 extender unit at a not-perfect location, you are facing trouble. To remove the issue we recommend that you locate your Linksys RE6700 extender unit at the central location of the house. Make sure that near metal or electronic gadgets don’t settle Linksys RE6700 extenders because they absorb all the WiFi signals which come from the extender and router units. By doing this you can quickly discard the Linksys extender trouble.
Install Or Get The Latest Version Software File
To get the latest version of the software file consider the below steps.
- First, link the computer to the Linksys extender network.
- Now, enter extender.linksys.com on a connected computer Chrome.
- By doing this, you will directly visit the Linksys web management page.
- Later, click the network administration option.
- In the end, hit the software upgrade option.
- Next, if you see any latest versions of the software file then install it on your computer and laptop.
- Hence the software of the Linksys WiFi range extender is now completely improved and the issue is removed.
Reset RE6700 Extender
Below the WiFi-protected setup button, you can see the reset hole button. Now press that reset hole for 10 seconds via paperclip. Next, all the extender LEDs will be powered off. Thus, it means your Linksys RE6700 extender is now completely reset.
Important Note: After resetting the Linksys RE6700 extender do the configuration process again.
Further, through the whole study of this blog, you will be able to log in and configure the Linksys RE6700 extender. As well as being able to resolve the RE6700 extender trouble by yourself. In your office and house if you are having a different Linksys extender model number for example RE6400 extender then try to visit the Linksys RE6400 setup page and consider all the display directions.